VIPRE: Office 365 - Receive Connector

To ensure 100% deliverability of your filtered mail from the VIPRE platform it is recommended that a receive connector is created on your Office/Microsoft 365, to do this  log in to the Office 365 admin portal, Select Exchange:

1. Log in to the Office 365 Exchange Admin Center (EAC)
   
2. Select the Admin > Exchange menu
3. Select the Mail Flow > Connectors menu and Create a new Connector
   
4. Set the mail flow scenario:
   

   From:  'Partner Organisation'
   To:  'Office 365'

    

   

    

5.  Enter a name and description for the connector, you can also tick the box to make the connector active straight away after creation. 

• Select use the sender IP

Use the below relevant range based on your location:

• USA

208.70.128.0/21
72.35.12.0/24
72.35.23.0/24

• UK & Ireland:

192.162.216.0/24
192.162.217.0/24
192.162.218.0/24
192.162.219.0/24
208.70.128.0/24
208.70.129.0/24
208.70.130.0/24
208.70.131.0/24
208.70.132.0/24
208.70.133.0/24
208.70.134.0/24
208.70.135.0/24
72.35.12.0/24
72.35.23.0/24

• Select if you wish to Enforce TLS or not:
  
  
• Click Review connector, and then click create connector.